KDAS Hydraulic Piston Seals
KDAS compact piston seal is a five-element double-acting piston seal set consisting of one specially shaped NBR rubber sealing ring, two split support rings made of thermoplastic material and two POM guide rings. KDAS is a compression type seal with excellent sealing properties, suitable for operation under pressure on both sides of the seal, as well as for rapid sealing action. The active piston is not pressed into the radial sealing gap during the sealing process and thus prevents the sealing element from twisting.
Material: NBR+POM+TPE
Application range (the following limit values must not be present at the same time):
Pressure: ≤ 250 bar
Speed: ≤ 0.5 m/s
Temperature: -30°C ~ +100°C
Operating medium: mineral-based hydraulic oils
Hydraulic piston seal KDAS 125x100x25.4/6.35 NBR+POM+TPE до 250 bar KVK/China
Product data
D=125 mm ; Ød=100 mm ; L=25.4 mm ; Ød1=118.1 mm ; Ød2=123 mm ; L1=6.35 mm ; r=0.8 mm
Material: NBR+POM+TPE
Application range (the following limit values cannot appear at the same time):
Pressure: ≤ 250 bar
Speed: ≤ 0.5 m/s
Temperature: -30°C ~ +100°C
Media: mineral-based hydraulic oils
Manufacturer:
Zhongxingshun Sealing Products Factory
Hydraulic piston seal KDAS 180x155x25.4/12.7 NBR+POM+TPE до 250 bar KVK/China
Product data
D=180 mm ; Ød=155 mm ; L=25.4 mm ; Ød1=171.7 mm ; Ød2=177.1mm ; L1=12.7 mm ; r=0.8 mm
Material: NBR+POM+TPE
Application range (the following limit values cannot appear at the same time):
Pressure: ≤ 250 bar
Speed: ≤ 0.5 m/s
Temperature: -30°C ~ +100°C
Media: mineral-based hydraulic oils
Manufacturer:
Zhongxingshun Sealing Products Factory
