A401 Back-up Rings
Back-up ring F4 75x85x2 PTFE KVK/China
Product data
Ød=75 mm ; ØD=85 mm ; T=2 mm
Material: Polytetrafluoroethylene (Teflon) PTFE
Application range (the following limit values cannot appear at the same time):
Speed: = 0 m/s (static seal)
Temperature: -30°C ~ +100°C
Media: mineral-based hydraulic oils and emulsions
Manufacturer:
Zhongxingshun Sealing Products Factory
In stock 10 pcs.
Back-up ring F4 70x75x1.25 PTFE KVK/China
Product data
Ød=70 mm ; ØD=75 mm ; T=1.25 mm
Material: Polytetrafluoroethylene (Teflon) PTFE
Application range (the following limit values cannot appear at the same time):
Speed: = 0 m/s (static seal)
Temperature: -30°C ~ +100°C
Media: mineral-based hydraulic oils and emulsions
Manufacturer:
Zhongxingshun Sealing Products Factory
In stock 40 pcs.
Back-up ring F4 60x65x1.25 PTFE KVK/China
Product data
Ød=60 mm ; ØD=65 mm ; T=1.25 mm
Material: Polytetrafluoroethylene (Teflon) PTFE
Application range (the following limit values cannot appear at the same time):
Speed: = 0 m/s (static seal)
Temperature: -30°C ~ +100°C
Media: mineral-based hydraulic oils and emulsions
Manufacturer:
Zhongxingshun Sealing Products Factory
In stock 20 pcs.
Back-up ring F4 45x50x1.2 PTFE KVK/China
Product data
Ød=45 mm ; ØD=50 mm ; T=1.2 mm
Material: Polytetrafluoroethylene (Teflon) PTFE
Application range (the following limit values cannot appear at the same time):
Speed: = 0 m/s (static seal)
Temperature: -30°C ~ +100°C
Media: mineral-based hydraulic oils and emulsions
Manufacturer:
Zhongxingshun Sealing Products Factory
In stock 20 pcs.
Back-up ring A401 53x63x1.7 TPE Alp
Back-up rings made of thermoplastic material TPE are intended for installation together with O-rings to reduce the extrusion gap between metal surfaces of two cylinder components to enable the seal to operate at higher pressures without extruding and being damaged.
For delivery options to your country, please do not hesitate to contact us!
In stock 18 pcs.
Back-up ring A401 150x160x1.7 TPE
Back-up rings made of thermoplastic material TPE are intended for installation together with O-rings to reduce the extrusion gap between metal surfaces of two cylinder components to enable the seal to operate at higher pressures without extruding and being damaged.
For delivery options to your country, please do not hesitate to contact us!
In stock 30 pcs.
Back-up ring A401 145x155x1.2 TPE
Back-up rings made of thermoplastic material TPE are intended for installation together with O-rings to reduce the extrusion gap between metal surfaces of two cylinder components to enable the seal to operate at higher pressures without extruding and being damaged.
For delivery options to your country, please do not hesitate to contact us!
In stock 4 pcs.
Back-up ring A401 145x152x4.7 TPE
Back-up rings made of thermoplastic material TPE are intended for installation together with O-rings to reduce the extrusion gap between metal surfaces of two cylinder components to enable the seal to operate at higher pressures without extruding and being damaged.
For delivery options to your country, please do not hesitate to contact us!
In stock 10 pcs.
Back-up ring A401 141.1x151x1.9 TPE
Back-up rings made of thermoplastic material TPE are intended for installation together with O-rings to reduce the extrusion gap between metal surfaces of two cylinder components to enable the seal to operate at higher pressures without extruding and being damaged.
For delivery options to your country, please do not hesitate to contact us!
In stock 20 pcs.
Back-up ring A401 135x145x1.2 TPE
Back-up rings made of thermoplastic material TPE are intended for installation together with O-rings to reduce the extrusion gap between metal surfaces of two cylinder components to enable the seal to operate at higher pressures without extruding and being damaged.
For delivery options to your country, please do not hesitate to contact us!
In stock 6 pcs.
