Hydraulic piston and rod seal Y 60x80x10 NBR80 up to 200 bar KVK/China
In stock 20 pcs.
- Code:55060080100
- Weight:0.005 Kgs
Product data
The hydraulic seal Y has a symmetrical design and is suitable for both piston and rod.
Ød=60 mm ; ØD=80 mm ; H=10 mm ; Ød1=60.8 mm ; ØD1=79.2 mm ; L=12 mm
Material: NBR80
Application range (the following limit values cannot appear at the same time):
Pressure: ≤ 200 bar
Speed: ≤ 0.5 m/s
Temperature: -30°C ~ +80°C
Media: mineral-based hydraulic oils and emulsions; not suitable for environmetally-friendly oils (bio oils)
Manufacturer:
Zhongxingshun Sealing Products Factory
Estimated Shipping


Y type can be used to seal pistons and piston rods and is widely used in various mechanical equipment. The groove design can be in accordance with Chinese standard HG4-335.
Applications:
Working pressure: ≤20MPa
Working temperature: Standard type (NBR) -30℃~+80℃
Reciprocating speed: ≤0.5m/s
Media: (NBR) general petroleum-based hydraulic oil, water-ethanol hydraulic oil, oil-water emulsion hydraulic oil (FPM) general petroleum hydraulic oil, phosphate ester hydraulic oil, water, gas.
Installation:
In order to avoid damage to the sealing edge, measures should be taken to avoid sharp edges during installation. In the case of large pressure changes and high speeds, this type of seal is usually fixed in the groove with a support ring.
Material:
The standard material is 80% nitrile rubber. According to different applications such as hydraulic and pneumatic, Y-type materials include 65-90 degrees nitrile and 65-85 degrees fluororubber.