Products
Wiper seal A1 38x46x4/7 PU93 KVK/China
Product data
Ød=38 mm ; ØD=46 mm ; H=7 mm ; L=4 mm ; a=1 mm ; h=1 mm
Material: PU93
Application range (the following limit values cannot appear at the same time):
Speed: ≤ 2.0 m/s
Temperature: -30°C ~ +100°C
Media: mineral hydraulic oils, water-glycol hydraulic oils, emulsions
Manufacturer:
Zhongxingshun Sealing Products Factory
Hydraulic piston and rod seal UPH-60 60x80x12 NBR90 up to 320 bar KVK/China
Product data
The hydraulic seal UPH has a symmetrical design and is suitable for both piston and rod.
Ød=60 mm ; ØD=80 mm ; h=12 mm ; ØD1=79 mm ; HA=13 mm ; HB=16 mm ; r=4 mm
Material: NBR90
Application range (the following limit values cannot appear at the same time):
Pressure: ≤ 320 bar; when the pressure is higher than 150 bar, it is recommended to use a back-up ring
Speed: ≤ 0.5 m/s
Temperature: -30°C ~ +100°C
Media: mineral hydraulic oils, water-glycol hydraulic oils, emulsions
Manufacturer:
Zhongxingshun Sealing Products Factory
In stock 58 pcs.
Hydraulic piston and rod seal UPH-32 32x47x10 NBR90 up to 320 bar KVK/China
Product data
The hydraulic seal UPH has a symmetrical design and is suitable for both piston and rod.
Ød=32 mm ; ØD=47 mm ; h=10 mm ; ØD1=46 mm ; HA=11 mm ; HB=14 mm ; r=3.5 mm
Material: NBR90
Application range (the following limit values cannot appear at the same time):
Pressure: ≤ 320 bar; when the pressure is higher than 150 bar, it is recommended to use a back-up ring
Speed: ≤ 0.5 m/s
Temperature: -30°C ~ +100°C
Media: mineral hydraulic oils, water-glycol hydraulic oils, emulsions
Manufacturer:
Zhongxingshun Sealing Products Factory
In stock 20 pcs.
Hydraulic piston and rod seal UPH-7.1A 7.1x17.1x7.5 NBR90 up to 320 bar KVK/China
Product data
The hydraulic seal UPH has a symmetrical design and is suitable for both piston and rod.
Ød=7.1 mm ; ØD=17.1 mm ; h=7.5 mm ; ØD1=16.1 mm ; HA=8.5 mm ; HB=10.5 mm ; r=2.5 mm
Material: NBR90
Application range (the following limit values cannot appear at the same time):
Pressure: ≤ 320 bar; when the pressure is higher than 150 bar, it is recommended to use a back-up ring
Speed: ≤ 0.5 m/s
Temperature: -30°C ~ +100°C
Media: mineral hydraulic oils, water-glycol hydraulic oils, emulsions
Manufacturer:
Zhongxingshun Sealing Products Factory
In stock 15 pcs.
Hydraulic piston and rod seal UPH-6.3A 6.3x16.3x7.5 NBR90 up to 320 bar KVK/China
Product data
The hydraulic seal UPH has a symmetrical design and is suitable for both piston and rod.
Ød=6.3 mm ; ØD=16.3 mm ; h=7.5 mm ; ØD1=15.3 mm ; HA=8.5 mm ; HB=10.5 mm ; r=2.5 mm
Material: NBR90
Application range (the following limit values cannot appear at the same time):
Pressure: ≤ 320 bar; when the pressure is higher than 150 bar, it is recommended to use a back-up ring
Speed: ≤ 0.5 m/s
Temperature: -30°C ~ +100°C
Media: mineral hydraulic oils, water-glycol hydraulic oils, emulsions
Manufacturer:
Zhongxingshun Sealing Products Factory
In stock 15 pcs.
Bearing HI-CAP ST 2857 LFTSH3 (28 x 57 x 17) KOYO/Japan , for transmission of MITSUBISHI MD723129
Product characteristics
Category: Tapered roller bearings
Case: Sheet steel case
Roller rows: Single row bearing
Outer ring: Without flange/groove
Bore: Cylindrical bore
Dimensions
Inner diameter (d): 28.000 mm
Outer diameter (D): 57.000 mm
Width (T) : 17.000 mm
Width (B) : 17.000 mm
Width (C) : 13.000 mm
Weight: 0.205 kg
OE reference:
ABART,ALFA ROMEO,FIAT,LANCIA,OPEL 55575323,0371466
Suitable for:
Mitsubishi Eclipse ,Mitsubishi Eterna, Mitsubishi Galant , Mitsubishi Lancer ,Mitsubishi Mirage
Manufacturer:
JTEKT CORPORATION/JAPAN
LFT: low friction technology
HI-CAP: high capacity
For delivery options to your country, please do not hesitate to contact us!
In stock 2 pcs.
Bearing ST 4573 (45 x 73 x 21) KOYO/Japan , for transmission of ABART,ALFA ROMEO,FIAT,LANCIA,OPEL 55575323,0371466
Product characteristics
Category: Tapered roller bearings
Case: Sheet steel case
Roller rows: Single row bearing
Outer ring: Without flange/groove
Bore: Cylindrical bore
Dimensions
Inner diameter (d): 45.000 mm
Outer diameter (D): 73.000 mm
Width (T) : 21.000 mm
Width (B) : 19.812 mm
Width (C) : 17.000 mm
Weight: 0.157 kg
OE reference:
ABART,ALFA ROMEO,FIAT,LANCIA,OPEL 55575323,0371466
LFT: low friction technology
HI-CAP: high capacity
Suitable for:
Manufacturer:
JTEKT CORPORATION/JAPAN
For delivery options to your country, please do not hesitate to contact us!
In stock 2 pcs.
Bearing 6201- TN9/C3 ( 12x32x10 ) SKF/Sweden
Product characteristics
Category: Deep groove ball bearing
Ball rows: Single row bearing
Material: Standard bearing steel
Outer ring: Without flange/groove
Seal: Contact seals on both sides
Clearance: Slightly increased radial clearance – C3
Cage Material: Polyamide
Bore: Cylindrical bore
Dimensions
Inner diameter (d): 12.000 mm
Outer diameter (D): 32.000 mm
Width (B): 10.000 mm
Limiting speed: 26 000 r/min
Dynamic load rating Cr 7.28 kN
Static load rating Cor 3.10 kN
Weight: 0.038 kg.
Manufacturer:
For delivery options to your country, please do not hesitate to contact us!
Product photos are for illustrative purposes and may differ from the actual appearance of the item. This does not affect the characteristics of the product.
In stock 4 pcs.
Bearing 6207 ( 35x72x17 ) SKF/Sweden, CLAAS 235916.0; JOHN DEERE L64838; LEMKEN 3198600,D090931
Category: Deep groove ball bearing
Ball rows: Single row bearing
Material: Standard bearing steel
Outer ring: Without flange/groove
Seal: Without seals
Clearance: Normal radial clearance
Cage Material: Steel
Bore: Cylindrical bore
Dimensions
Inner diameter (d): 35.000 mm
Outer diameter (D): 72.000 mm
Width (B): 17.000 mm
Reference speed: 20 000 r/min
Limited speed: 13 000 r/min
Dynamic load rating Cr 27.0 kN
Static load rating Cor 15.3 kN
Manufacturer:
For delivery options to your country, please do not hesitate to contact us!
Product photos are for illustrative purposes and may differ from the actual appearance of the item. This does not affect the characteristics of the product.
In stock 2 pcs.
Bearing 5203 KYY2 (16.25x40x44.1) NAF/China for seeder HORSCH
Product characteristics
Category: Angular contact ball bearings
Ball rows: Double row bearing
Material: Standard bearing steel
Outer ring: Without flange/groove
Seal: Contact seals on both sides
Clearance: Normal radial clearance
Cage Material: Steel
Bore: Cylindrical bore
Contact angle: 30 degree
Dimensions
Inner diameter (d): 14.250 mm
Outer diameter (D): 40.000 mm
Width (B): 44.100 mm
Weight: 0.220 kg.
OE references:
CA130 Amazone ,Y00513900 Amazone, 324461A1 CASE, 10161048 CNH 306007A1, CNH 324461A1 ,CNH 324461A1A1, CASE 822-170C ,CASE 822-170C, Great Plains 00240216, Horsch 00310926, Horsch 00400843 ,Horsch 00400845, Horsch AN212132 JOHN DEERE GA6171, KINZE GA6615, KINZE 40-156, Kuhn 81101640, Kuhn F04100150R, MASCHIO GASPARDO 10161048, MONOSEM 7140A, MONOSEM 900125 ,MONOSEM 465911, Vaderstad
Manufacturer:
NAF
For delivery options to your country, please do not hesitate to contact us!
In stock 2 pcs.
