All Promotions

Oil seal type BS (TB),  with metal outer diameter, with  dust lip and with spring. 

Material: nitrile rubber (NBR).

Helix:

OE references:

Suitable for:

Toyota Dyna ,Toyota Hiace ,Toyota Hilux, Toyota Lite Ace, Toyota Lite Ace Truck, Toyota Master Ace Surf ,Toyota Town Ace, Toyota Town Ace Truck ,Toyota ToyoAce

Manufacturer:  SO GIANT OIL SEAL INDUSTRIAL  CO., LTD

Oil seal type AS (104),  with dust lip and with spring. 

Material: silicone rubber  (MVQ)

Helix:left helix 

Suitable for crankshaft rear side of:

Toyota Coaster ,Toyota Land Cruiser, Toyota Land Cruiser Prado

The nitrile rubber may vary in color from the one shown in the picture, without this affecting the sealing properties of the oil seal.

Manufacturer:  SO GIANT OIL SEAL INDUSTRIAL  CO., LTD

For delivery options to your country, please do not hesitate to contact us!

Product characteristics

Category: Tapered roller bearings

Case: Sheet steel case

Roller rows: Single row bearing

Dimensions

Inner diameter:  25.400 mm

Outer diameter:  50.292 mm

Width:  14.224 mm

Width (B) :  14.732 mm

Width (C) :  10.668 mm

Weight:  0.130 kg.

OEM references:

Agco 70341230,70937220,W9112020,W983475,W983477; CASE 463911R91,572564R1,D29266,D29267; Chrysler 2072714, 84225; GREAT PLAINS 822-030C,822-080C ;John Deere JD8253,JD8933; KINZE GA0245,GR0150; Massey Ferguson 832190M1 ;New Holland 132709.132710; Volvo 183750,183751

Suitable for:

Balers: JOHN DEERE

Combine harvesters: JOHN DEERE

Forage harvesters: JOHN DEERE

Tractors: JOHN DEERE

List of agricultural machinery: HERE

Manufacturer:

For delivery options to your country, please do not hesitate to contact us!  

Product characteristics

Category: Tapered roller bearings

Case: Sheet steel case

Roller rows: Single row bearing

Dimensions

Inner diameter (d):  55.000 mm

Outer diameter (D):  90.000 mm

Width (T) :  23.000 mm

Width (B) :  23.000 mm

Width (C) :  18.500 mm

Weight:  0.540 kg.

Dynamic load rating:  Cr  91.8 kN

Static load rating:     Cor  123.0 kN

List of agricultural machinery: HERE

Manufacturer: 

For delivery options to your country, please do not hesitate to contact us!

Product characteristics

Category: Tapered roller bearings

Case: Sheet steel case

Roller rows: Single row bearing

Outer ring: Without flange/groove   

Bore: Cylindrical bore

Dimensions

Inner diameter (d):  40.000 mm

Outer diameter (D):  78.000 mm

Width (T) :  21.350 mm

Width (B) :  18.000 mm

Width (C) :  16.500 mm

Weight:  0.396 kg.

LFT: low friction technology

HI-CAP: high capacity

Suitable for:

Lexus ES300, Toyota Avalon, Toyota Camry, Toyota Camry Gracia, Toyota Mark II, Toyota Mark II Wagon Qualis, Toyota Pronard, Toyota Sienna, Toyota Solara, Toyota Windom         

Manufacturer:

JTEKT CORPORATION/JAPAN

​For delivery options to your country, please do not hesitate to contact us!

Oil seal type AS (TC),  with  dust lip and with  spring. 

Material: fluoride rubber ( FPM)

Helix:

OE references:

Suitable for:

Manufacturer:  NAK/TW

Product data

Ød=30 mm ; ØD=40 mm ; h=7 mm

Material: PU93

Application range (the following limit values cannot appear at the same time):

Pressure: ≤ 320 bar; when the pressure is higher than 200 bar, it is recommended to use a back-up ring
Speed: ≤ 0.8 m/s
Temperature: -30°C ~ +80°C
Media: mineral-based hydraulic oils and emulsions; not suitable for environmetally-friendly oils (bio oils)

Manufacturer:

Zhongxingshun Sealing Products Factory

Price is for 1 m.

Product data

The guide strip has good wear resistance. The guide strip can be cut into rolls of arbitrary length. It is suitable for repair and maintenance, especially for large sizes (>100 mm). It is easy to install, maintenance-free and corrosion-resistant, reducing the risk of damage to metal parts. It has good sliding ability and excellent emergency operation conditions in case of insufficient sliding.

L= 30 mm ; s = 2.5 mm

Ød=51 mm ; ØD=56 mm ; h=15 mm 

Material: phenolic resin

Medium: All lubricating media

Operating temperature ℃: -40 to +120

Specific gravity: 1.1g/cm3

Thermal expansion coefficient: 8.3x10-5(k-1)

Speed: ≤1m/s

Friction coefficient: 0.15-0.2

Compressive strength: 3.9N/mm2

Manufacturer:

Zhongxingshun Sealing Products Factory

Product data

Ød=51 mm ; ØD=56 mm ; h=15 mm 

Material: Fabric-reinforced phenolic resin

Application range (the following limit values cannot appear at the same time):

Speed: ≤ 0.5 m/s
Temperature: -50°C ~ +120°C
Media: mineral-based hydraulic oils and emulsions

Manufacturer:

Zhongxingshun Sealing Products Factory

Product data

The hydraulic seal UPH has a symmetrical design and is suitable for both piston and rod.

Ød=90 mm ; ØD=120 mm ; h=15 mm ; ØD1=118 mm ; HA=16 mm ; HB=19 mm ; r=5 mm

Material: NBR90

Application range (the following limit values cannot appear at the same time):

Pressure: ≤ 320 bar; when the pressure is higher than 150 bar, it is recommended to use a back-up ring
Speed: ≤ 0.5 m/s
Temperature: -30°C ~ +100°C
Media: mineral hydraulic oils, water-glycol hydraulic oils, emulsions

Manufacturer:

Zhongxingshun Sealing Products Factory