Products
Кnife section 80-4-0406-G (80x76.2x2.7) MWS/Germany,DEUTZ-FAHR 06503530, JOHN DEERE Z93077,AZ40032,Z52672, LAVERDA 322702850, SCHUMAHER 420.100.045
| technical Informations |
| Geometry |
| Number of blades: 2 |
| Cutting edge geometry position: one-sided |
| Cutting edge geometry variation: coarsely toothed |
| Cutting edge geometry: serrated at the top |
| Hole geometry: round |
| Hole Diameter: 6.5 |
| Protection class |
| Quality level: Standard |
| Medium |
| grain |
| ProduktName_DE |
| Name 2: C 15/2,7z |
| References |
| for manufacturer/type: John Deere |
| ReferenceNo: Z93077 |
| for manufacturer/type: Schumacher |
| ReferenceNo: 420100045; Z93077; 10961G; |
| Product family |
| Assembly group: Cutting Unit |
| Installation position: Knife bar |
Suitable for: HERE
Manufacturer:
For delivery options to your country, please do not hesitate to contact us!
In stock 814 pcs.
Кnife section 80-4-0379-G (83x76.2x2.7) MWS/Germany, JOHN DEERE P 49.650 H
| technical Informations |
| Geometry |
| Number of blades: 2 |
| Cutting edge geometry position: one-sided |
| Cutting edge geometry variation: coarsely toothed |
| Cutting edge geometry: serrated at the top |
| Hole geometry: round |
| Hole Diameter: 6.7 |
| Protection class |
| Quality level: Standard |
| Medium |
| grain |
| References |
| for manufacturer/type: John Deere |
| ReferenceNo: P49650H |
| Product family |
| Assembly group: Cutting Unit |
| Installation position: Knife bar |
Suitable for: HERE
For delivery options to your country, please do not hesitate to contact us!
In stock 195 pcs.
Кnife section 80-4-0031-g (83x76.2x2.7) MWS/Germany,CLAAS 611.203.1
| technical Informations |
| Geometry |
| Number of blades: 2 |
| Cutting edge geometry position: one-sided |
| Cutting edge geometry variation: coarsely toothed |
| Cutting edge geometry: serrated at the top |
| Hole geometry: round |
| Hole Diameter: 6.5 |
| Protection class |
| Quality level: Standard |
| Medium |
| grain |
| References |
| for manufacturer/type: Claas |
| ReferenceNo: 6112031 |
| Product family |
| Assembly group: Cutting Unit |
| Installation position: Knife bar |
Suitable for: HERE
Manufacturer:
For delivery options to your country, please do not hesitate to contact us!
In stock 445 pcs.
Straw chopper blade right 60-0190-58-01-0 (187ммx51ммx4.9мм) MWS/Germany, JOHN DEERE HXE 22820/HXE 92551
| technical Informations |
| Geometry |
| Number of blades: 1 |
| Cutting edge geometry position: one-sided |
| Cutting edge geometry variation: serrated |
| Cutting edge geometry: serrated |
| Hole geometry: round |
| Hole Diameter: 19.5 |
| Protection class |
| Quality level: Premium |
| Wear protection: coated |
| Coating type: laser coated |
| Color |
| nature |
| Medium |
| grain |
| ProduktName_DE |
| Name 2: serrated |
| References |
| for manufacturer/type: John Deere |
| ReferenceNo: HXE22820 |
| Product family |
| Assembly group: Crop / Straw Discharge |
| Installation position: knife drum |
Suitable for models: 9470STS, 9570STS, 9670STS, 9770STS, 9870STS, S540, S550, S690
Manufacturer:
For delivery options to your country, please do not hesitate to contact us!
In stock 16 pcs.
Straw chopper blade left 60-0190-57-01-0 (187ммx51ммx4.9мм) MWS/Germany, JOHN DEERE HXE 22819/HXE 92550
| technical Informations |
| Geometry |
| Number of blades: 1 |
| Cutting edge geometry position: one-sided |
| Cutting edge geometry variation: serrated |
| Cutting edge geometry: serrated |
| Hole geometry: round |
| Hole Diameter: 19.5 |
| Protection class |
| Quality level: Premium |
| Wear protection: coated |
| Coating type: laser coated |
| Color |
| nature |
| Medium |
| grain |
| ProduktName_DE |
| Name 2: serrated |
| References |
| for manufacturer/type: John Deere |
| ReferenceNo: HXE22819; |
| Product family |
| Assembly group: Crop / Straw Discharge |
| Installation position: knife drum |
Suitable for models:
9470STS, 9570STS, 9670STS, 9770STS, 9870STS, S540, S550, S690
Note: The knife shown in the drawing is right.
Manufacturer:
For delivery options to your country, please do not hesitate to contact us!
In stock 16 pcs.
Cover seal A403-009 9.6x12.9x3.1 PU95 Alp for rod applications
ALP A403 cover seals are produced from high performance PU material, and can be used safely for inner sealing in hydraulic cylinders instead of statically-functioning O-rings.
| TECHNICAL DATA | ||
| Working Pressure | 630 Bar | |
| Working Temperature | -35/+110°C | |
| Material | 95 PU | |
| Media | Mineral Base Hydraulic Oil | |
| Surface Roughness | ||
| Ra | Rmax | |
| Working Surface | ≤0.8 μm | ≤3.2 μm |
| Groove Base | ≤1.6 μm | ≤6.3 μm |
| Groove Flanks | ≤6.3 μm | ≤16.0 μm |
Manufacturer:
ALP KAUCUK SANAYI VE TICARET A.S.
In stock 6 pcs.
Wiper seal A202 28x36.6x5/7 PU92 Alp
A202 Wipers, which have a widespread use, are designed to prevent the entry of unfavourable particles into the system of hydraulic cylinders.
| TECHNICAL DATA | ||
| Standard Materials | NBR | PU |
| Working Temperature | -30/+105°C | -40/+100°C |
| Sliding Speed | 1.00 m/sn | 1.00 m/sn |
| Material | 90 NBR | 92 PU |
| Surface Roughness | ||
| Ra | Rmax | |
| Dynamic Surface | ≤0.4 μm | ≤3.2 μm |
| Groove Base | ≤1.6 μm | ≤10.0 μm |
| Groove Flanks | ≤3.2 μm | ≤16.0 μm |
Мanufactured sizes: HERE
Manufacturer:
ALP KAUCUK SANAYI VE TICARET A.S.
For delivery options to your country, please do not hesitate to contact us!
In stock 50 pcs.
Wiper seal A202-028 28x36.6x5/7 NBR90 Alp
A202 Wipers, which have a widespread use, are designed to prevent the entry of unfavourable particles into the system of hydraulic cylinders.
| TECHNICAL DATA | ||
| Standard Materials | NBR | PU |
| Working Temperature | -30/+105°C | -40/+100°C |
| Sliding Speed | 1.00 m/sn | 1.00 m/sn |
| Material | 90 NBR | 92 PU |
| Surface Roughness | ||
| Ra | Rmax | |
| Dynamic Surface | ≤0.4 μm | ≤3.2 μm |
| Groove Base | ≤1.6 μm | ≤10.0 μm |
| Groove Flanks | ≤3.2 μm | ≤16.0 μm |
Мanufactured sizes: HERE
Manufacturer:
ALP KAUCUK SANAYI VE TICARET A.S.
For delivery options to your country, please do not hesitate to contact us!
In stock 27 pcs.
Straw chopper blade 60-0190-52-01-2 (190mmx50mmx5mm) MWS/Germany, JOHN DEERE HXE15871
| technical Informations |
| Geometry |
| Number of blades: 2 |
| Cutting edge geometry position: bilaterally |
| Cutting edge geometry variation: serrated |
| Cutting edge geometry: serrated |
| Hole geometry: round |
| Hole Diameter: 19.1 |
| Protection class |
| Quality level: Standard |
| Color |
| nature |
| Medium |
| grain |
| ProduktName_DE |
| Name 2: serrated |
| References |
| for manufacturer/type: John Deere |
| ReferenceNo: HXE15871 |
| Product family |
| Assembly group: Crop / Straw Discharge |
| Installation position: knife drum |
Suitable for: S 690
Manufacturer:
For delivery options to your country, please do not hesitate to contact us!
In stock 30 pcs.
Counter knife 60-0190-06-01-2 ( 190x50x3 ) black powder coated MWS/Germany, JOHN DEERE H215004
| technical Informations |
| Geometry |
| Number of blades: 2 |
| Cutting edge geometry position: bilaterally |
| Cutting edge geometry variation: smooth |
| Cutting edge geometry: smooth |
| Hole geometry: round |
| Hole Diameter: 12 |
| Protection class |
| Quality level: Standard |
| Color |
| Matt black |
| Medium |
| grain |
| ProduktName_DE |
| Name 2: smooth |
| References |
| for manufacturer/type: John Deere |
| ReferenceNo: H215004 |
| Product family |
| Assembly group: Crop / Straw Discharge |
| Installation position: Knife carrier |
Suitable for: HERE
Manufacturer:
For delivery options to your country, please do not hesitate to contact us!
In stock 40 pcs.
